/
Insufflator 45L with exsufflation

Electronic Insufflator ECONT 0401.5


Hight Performance

Smart Continues Flow Algorithm

Gas heating system

High level of patient safety

Smoke evacuation

ECONT 0401.5

The insufflator maintains pneumoperitoneum under extreme conditions for reliability during all laparoscopic procedures. It offers real-time pressure sensing for increased accuracy during a procedure. Active exsufflation in case of continuing excess pressure in the connected body cavity is taken for higher patient safety.

Features:

  • insufflator 45L L/min gas flow with exsufflation

SAFETY

  • automatic computer-supported check on device soft- and hardware when turning the unit on
  • internal gas exsufflation valve is activated for automatically reduction of dangerous intra-abdominal overpressure

ERGONOMIC DESIGN

  • big 7” TFT display gives a quick overview of the rated and actual values of gas pressure, gas flow, alarms, etc.
  • the setting of the working parameters is made by touching controls on the touch-screen multilanguage menu

PERFORMANCE

  • high flow rate capacity of 45 l/min quickly compensates for even big gas losses
  • insufflator’s Smart Continuous Flow algorithm ensures insufflation depending on the filling level of the body cavity, thus an optimized filling speed is achieved with fully automatic, situation-related insufflation pressure values. A continuous gas flow provides a filling procedure with small pressure fluctuations in the body cavity and a high average insufflation performance

GAS HEATING

  • For eliminating of post-surgery problems the insufflator is equipped with a high-efficiency gas heating subsystem

SMOKE EVACUATION

  • Evacuation of smoke and mist generated during electrosurgery and ultrasonic procedures can be made by pressing the footswitch

GAS SUPPLY

  • The device can be used with gas bottles or central gas supply systems
  • Input pressure range 4...100 bars

Specifications

Electronic Insufflator ECONT 0401.5

Related products

The ECONT 0401.3 is a new generation of CO2 insufflators with outstanding technical specifications. The unit is controlled by built-in microprocessor system to ensure highest level of patient safety. The insufflator maintains pneumoperitoneum under extreme conditions for reliability during all laparoscopic procedures. It offers real time pressure sensing for increased accuracy during a procedure. Stable pressure balance in the abdomen is guaranteed by high gas flow performance (40 liter per minute) and low insufflation pressure.

Electronic CO2 insufflator with 30 l/min flow rate and smart insufflation algorithm. Gas pre-heating is available as an option.ECONT 0401.2 insufflator is the next step in perfomance for surgeon and in safety for patient. This microprocessor-controlled unit with high flow rate (up to 30 l/min), gas heating subsystem and automatic gas exsufflation can be used with devices like argon beamers, gas lasers etc. simultaneously. It is equipped with all needed safety systems to ensure maximum comfort for surgeon and minimum hazard for patient during operation.